high temperature resistant adh > abrasion high temperature resistant ceramic epoxy adhesive

abrasion high temperature resistant ceramic epoxy adhesive

BD300 wear abrasion high temperature resistant ceramic tile bonding epoxy adhesive

performance feature:
1.It’s consist of modified heat resistant toughening resin and special curing agent
2.Aging resistant,high temperature resistant,medium resistant, good toughness
3.Can cure at the normal temperature, can also heat up for curing
4.The highest working temperature is 300 degree,when it’s used as repairing agent, and the highest working temperature is 250
degree,when it’s used as the structure adhesive.

product usage of our BD300 high temperature abrasion wear resistant epoxy bonding ceramic tile adhesives:
With the high bonding strength, good toughness,suitable for the bonding of metal,ceramic,cement and glass.
Used in the paste of the high temperature working condition wear resistant ceramic chip,also suitable for the bonding and
repairing of the high temperature working condition mechanical parts.

performance index:

product name

physical
state

standard
packaging

operation
time limit
(25℃)

usable
time
(25℃)

range of application

BD300

Cement shape

5kg/group

0.5h

6 hours

With the high adhesive strength to steel,cement,
ceramic, aluminum alloy, stainless steel
and various other materials,especially suitable for
the paste of wear resistant ceramic chip under
the temperature of 300 degree working condition
and equipment

item	color	density (g/cm3)	shear strength (Mpa) GB7124-2008	impact strength (J/cm2) GB6328-1999	tensile strength (Mpa) GB6329-2008	compressive strength (Mpa) GB1041-2008	working temperature （℃）
BD300	gray	1.33	11	57	86	89	-60-300

How to use:
1.Surface treatment: Grinding or sand blasting to clean up the dust,greasy dirt and rust on the surface of adherend,
clean it by cleaning agent in the end.

2.Configure adhesive: According to specified percentage(mass ratio:5:1), make A and B two components mix uniformly.

3.Using adhesive:Make the mixed-up adhesive spread coating on the surface of adherend uniformly.

4.Curing: It takes 24 hours at the room temperature（25℃) for curing fully,or cure for 2 hours at the normal temperature then
heat it up to the temperature of 80 degree and keep this temperature for 4 hours for curing fully.

Every time the suitable quantity of configuring adhesive is 300g～500g,too much adhesive is not easy to mix uniformly,every time the usable time of configuring adhesive is about 30～40 min,the usable time is long at the low temperature,the usable time is short at the high temperature,should adjust the configured
adhesive quantity according to the actual condition.

Packaging specification:
Packed in a plastic drum, A component: 4.17Kg/drum, 4 drums/carton;  B component: 0.83Kg/drum, 12 drums/carton
or 8 drums/carton.

Transportation storage:
Sealed storage in the cool and dry place. The warranty period is 1 year. Avoid placing it upside down,
knocking against and transporting it as a non-dangerous product during transportation.

Product packaging photo of BD300 high temperature abrasion wear resistant epoxy ceramic adhesives:

------分隔线----------------------------